Need help?Do you have a question about the Kenwood KX-W4050 and is the answer not in the manual?
General| Type | Double Cassette Deck |
|---|---|
| Track System | 4-track, 2-channel stereo |
| Tape Speed | 4.76 cm/s |
| Total Harmonic Distortion | 0.8% |
| Motor | DC motor |
| Frequency Response (Normal Tape) | 30 Hz |
| Frequency Response (Metal Tape) | 30 Hz |
| Signal-to-Noise Ratio | 58 dB |
| Wow and Flutter | 0.08% (WRMS) |
| Input | Line input |
| Output | Line output |
| Inputs | 1 x line |
| Outputs | 1 x line |
| Power Supply | 50/60 Hz |
Essential warnings to prevent fire or electric shock.
Guide to connecting amplifier, CD player, turntable and using system control cords.
Guide to playing tapes, including setup, playback, stopping, and winding.
Details on skip play, single-tune repeat, rewind & play, and dash & play.
Step-by-step instructions for standard recording, including level adjustments and Dolby NR.
Instructions for synchro recording from CD players and analog discs.
Explanation and procedure for automatic CD recording.
To Next Page
