To Next PageTo Next Page
Need help?Do you have a question about the Kenwood LS-M66-H and is the answer not in the manual?
General| CD Player | Yes |
|---|---|
| FM Tuner | Yes |
| USB Port | Yes |
| Configuration | 2.0 Channel |
| Speakers | 2-way speakers with 120mm woofer and 25mm tweeter |
Lists included accessories for the system.
Important warnings and safety instructions for operation.
Procedure to reset the microcomputer in case of malfunction.
Steps to take before moving or transporting the unit.
Information on laser safety classifications and warnings.
The main chassis or housing of the unit.
Points for speaker, AUX, and antenna connections.
Location of the AC power cord bushing and cord.
Steps to manually open the CD tray if it fails to eject.
Procedures for adjusting CD player settings like laser current.
Procedures for demagnetization, azimuth, and tape speed.
Procedures for bias current adjustment on the cassette deck PC board.
Procedure to measure and set the idle current.
Diagram showing component placement on the CD mechanism PC board.
Diagram showing component placement on the main system PC board.
Diagram showing component placement on the tuner and control PC board.
Component layout for microcontroller and audio sections of PC board.
Component layout for power and interface sections of PC board.
Component layout for audio processing sections of PC board.
Important safety precautions and notes on measurement during schematic analysis.
Diagrams illustrating the assembly of the CD mechanism and chassis.
Exploded view diagram showing parts of the CD mechanism.
Exploded view diagram of the main unit's components.
Detailed list of parts for the LS-M66 speaker system.
Detailed list of parts for the RXD-M66 main unit.
Detailed list of parts for the CD mechanism.
Detailed list of parts for the display unit.
Detailed list of parts for the control unit.
List of trimming potentiometers used in the unit.
Detailed list of various capacitors used in the unit.
Detailed list of various capacitors used in the unit.
Detailed list of resistors and diodes used in the unit.
Detailed list of ICs and transistors used in the unit.
Table of abbreviations for model and mass production destinations.
Details on effective output power and frequency response.
Details on tuning frequency ranges for FM and AM bands.
Details on laser, sampling, and D/A conversion.
Details on recording system, heads, and winding time.
Details on power consumption, dimensions, and speaker configuration.
