To Next PageTo Next Page
Need help?Do you have a question about the Kenwood NEXEDGE NX-700 series and is the answer not in the manual?
General| Operating Voltage | 13.6V DC ±15% |
|---|---|
| Operating Temperature | -30°C to +60°C |
| IP Rating | IP54 |
| Frequency Range | 136-174 MHz |
| Channel Spacing | 12.5 kHz, 25 kHz |
| Weight | 1.1 kg |
| Number of Channels | 512 |
| Modulation | 16K0F3E / 11K0F3E / 8K50F3E |
Warning about operating transceivers in environments with explosive gases, dust, or fumes.
Guide to navigate and choose communication channels.
Procedure for initiating group communications in digital mode.
Procedure for initiating one-on-one communications in digital mode.
How to effectively receive group communications.
How to receive and respond to one-on-one communications.
Detailed explanation of each function available within the menu system.
Configuring and utilizing priority channels for enhanced scanning.
Process for selecting and sending status messages to other units.
How to access and read stored incoming messages.
Step-by-step guide for manual DTMF number entry and using the keypad.
Guide to initiating telephone calls via manual dialing or list selection.
Procedure for answering incoming telephone calls.
How to activate the scrambler for encrypted communication.
Understanding tone/code signaling for call filtering and privacy.
How to configure QT/DQT settings for specific channels.
