To Next PageTo Next Page
Need help?Do you have a question about the Kenwood NEXEDGE NX-300 and is the answer not in the manual?
General| Power Output | 5W (VHF), 4W (UHF) |
|---|---|
| Zones | 16 |
| Digital Protocol | NXDN |
| Operating Voltage | 7.5V DC ±20% |
| IP Rating | IP54/55 |
| Operating Temperature | -30°C to +60°C |
| Frequency Range | 136-174 MHz, 450-520 MHz |
| Channel Spacing | 12.5 kHz/25 kHz (Analog), 6.25 kHz/12.5 kHz (Digital) |
| Modulation | 4FSK (Digital), FM (Analog) |
Details FCC compliance information for Class B digital devices.
Step-by-step guide for making DTMF calls.
Allows quick calling of programmed DTMF numbers.
Function to disable a stolen or lost transceiver.
Instructions for making telephone calls via trunking.
How to receive telephone calls on trunking channels.
Lists all accessories included with the transceiver.
Safety guidelines for handling and charging the battery pack.
Description of the transceiver's display screen and its indicators.
Instructions for turning the transceiver on and off.
Procedure for setting or entering a transceiver password.
Instructions for making digital group calls.
Instructions for making digital individual calls.
How to receive digital group calls.
How to receive digital individual calls.
Steps to enter and navigate the menu.
How to temporarily remove channels from the scan list.
Describes how to make and receive selective calls.
Steps to send a status message.
How to adjust the sensitivity for VOX operation.
How to switch the transceiver to encrypted transmission mode.
Explains using tones/codes to filter calls.
How to reprogram signaling settings.
How to adjust the sensitivity for VOX operation.
Steps to set or adjust the transceiver's clock time.
Prevents extended use of a channel by limiting transmit time.
Conserves battery power by reducing usage when idle.
Provides auto recording and voice memo functions.
