To Next PageTo Next Page
Need help?Do you have a question about the Kenwood NEXEDGE NX-210 and is the answer not in the manual?
General| Operating Temperature | -30°C to +60°C |
|---|---|
| Digital Protocol | NXDN |
| IP Rating | IP54 |
| Frequency Range | 136-174 MHz |
| Power Output | 5 W |
| Channel Spacing | 12.5 kHz |
| Digital Modulation | 4FSK |
| Analog Modulation | 16K0F3E, 11K0F3E |
Lists key features of the NX-210 portable radio including model specifications, channel capacity, display, and build standards.
Details digital capabilities like NXDN air interface, vocoder, channel spacing, over-the-air features, and call types.
Covers features for conventional digital operation, including RAN, selective calls, mixed mode, IP networks, and site roaming.
Outlines trunked digital operation features such as private/group calls, transmission modes, queuing, and priority monitoring.
Specifies compatibility with multi-site IP networks, including GID/UID capacity, wide area calls, and auto-registration.
Describes scanning capabilities, including zone, multi-zone, list scanning, and dual priority scanning.
Lists available battery types (Ni-Cd, Ni-MH, Li-ion, Li-Polymer) and battery cases.
Details various charger options, including rapid rate chargers, six-unit chargers, and vehicular charger adapters.
Presents different antenna types for VHF frequencies, including helical, whip, stubby, and high gain models.
Includes speaker microphones, earphones, and headsets designed for enhanced audio communication.
Lists accessories for carrying and mounting the radio, such as belt clips and heavy-duty carrying cases.
Details general radio parameters like frequency range, channel capacity, zones, and battery life under various conditions.
Provides receiver performance metrics including sensitivity, selectivity, intermodulation distortion, and spurious response.
Lists transmitter output power, spurious response, FM hum/noise, and audio distortion characteristics.
Details modulation types and bandwidths for digital and analog signals, including audio distortion.
Details compliance with MIL-STD 810C through 810G standards for various environmental conditions.
Specifies the IP54/55 rating for dust and water protection, noting connector requirements.
