To Next PageTo Next Page
Need help?Do you have a question about the Kenwood RXD-M33V and is the answer not in the manual?
Amplifier Section| rated output power during STEREO operation (1 kHz, 10% T.H.D., at 6 Ω) | 30 W + 30 W |
|---|---|
| frequency response AUX | 50 Hz~50 kHz (0 dB ~ -3dB) |
Tuner Section| FM tuning frequency range | 87.5 MHz ~ 108 MHz |
|---|---|
| AM tuning frequency range (9 kHz step) | 531 kHz ~ 1, 602 kHz |
| AM tuning frequency range (10 kHz step) | 530 kHz ~ 1, 610 kHz |
CD Player Section| D/A conversion | 1 Bit |
|---|---|
| over sampling | 8 fs (352.8 kHz) |
| laser wave length | 760 to 800 nm |
Cassette Deck Section| wow and flutter | 0.2 % (W.R.M.S.) |
|---|---|
| fast winding time | Approx. 110 seconds (C-60 tape) |
| recording system | AC bias system (Frequency: 105 kHz) |
General Specifications| power consumption | 90 W |
|---|---|
| dimensions (W x H x D) | 180 mm x 255 mm x 317 mm |
| weight (net) | 5.5 kg |
Speaker Specifications| woofer size | 120 mm, cone type |
|---|---|
| tweeter size | 25 mm, dome type |
| weight (net) per piece | 2.3 kg |
Procedure to reset the microcomputer to restore normal operation due to malfunction or external factors.
Illustration showing external components and connection terminals of the unit.
Instructions to open the CD tray when it does not come out.
Method for initializing the system and understanding initial operation displays and error indications.
Details on receiving frequencies, channels, and preset frequencies for tuner destinations.
Instructions for setting up and canceling test modes, including their specific operations.
Details on operating the CD player in test mode, including key functions and display indications.
Instructions for operating the cassette deck in test mode, covering recording and mechanism switch indications.
Procedures for factory test mode, specifically for controlling CD tray open/close operations.
Detailed description of microcomputer ports, their functions, and active states (H/L).
Mapping of input voltages to key presses for controlling various functions on the unit.
Detailed port descriptions for specific ICs, including Sound Controller and PB/REC Equalizer IC.
Logic states and protection mechanisms for cassette deck, voltage, CD protection, thermal sensor, and CD tray control.
Procedures for adjusting cassette deck functions like demagnetization, azimuth, and tape speed.
Instructions for adjusting PC board components, specifically bias current for recording and playback levels.
Procedure for adjusting laser current for CD player, including test mode and required equipment.
Parts list for RXD-M33V-S, -L, -N models and their M2 variants.
Components for the Power Supply Unit, including fuses and connectors.
