Kenwood RXD-M57MP-H User Manual

COMPACT Hi-Fi COMPONENT SYSTEM
RXD-M57MP-H/M57MP-S
SERVICE MANUAL
(HM-537MP)
© 2004-8 PRINTED IN KOREA
B51-5923-00 (K/K) 339
In compliance with Federal Regulations, following are repro-
duction of labels on, or inside the product relating to laser
product safety.
KENWOOD Corp. certifies this equipment conforms to DHHS
Regulations No.21 CFR 1040. 10, Chapter 1, subchapter J.
DANGER : Laser radiation when open and interlock defeated.
AVOID DIRECT EXPOSURE TO BEAM.
Caution : No connection of ground line if disassemble
the unit. Please connect the ground line on
rear panel, PCBs, Chassis and some others.
70%
Front cabinet ass’y *
(A60-)
Knob(Open/Close)
(K29-8416-08)
Knob(EQ/Bass) *
(K29-)
Knob(Volume)
(K29-8413-08)
Control panel *
(A21-)
Knob(Demo) *
(K29-)
Knob(Prog) *
(K29-)
CD Door *
(A29-)
Knob(Power)
(K29-8417-08)
Knob(Function)
(K29-8414-08)
Knob(Stop/REC)
(K29-8415-08)
Cass lid ass’y *
(A53-)
Rubber foot
(G11-2961-08)
Knob(Play) *
(K29-)
Phone jack
(E11-0981-08)
* Refer to parts list on page 20.

Kenwood RXD-M57MP-H Specifications

General

CD Player	Yes
Cassette deck	Yes
USB Port	Yes
MP3 Playback	Yes
WMA Playback	Yes
FM Tuner	Yes
AM Tuner	Yes
Remote Control	Yes
Speaker Impedance	6 Ohm
Functions	CD, Cassette, Radio, USB
CD player type	Single Disc
Playable CD formats	CD-R, CD-RW
Tuner bands	AM/FM
Type	Mini Hi-Fi System
Speakers	2 speakers included

Summary

Cautions and Accessories

Included Accessories List

List of included accessories with their part numbers for the system.

Microcomputer Reset Procedure

Steps to reset the microcomputer if the unit malfunctions or becomes unresponsive.

Laser Safety Warning

Important notice regarding Class 1 laser product classification and safety precautions.

External View

Adjustment Procedures

Mechanical System Maintenance

Covers lubrication, cleaning, torque, pinch wheel pressure, tape head servicing, and erase head alignment.

Head Azimuth and Tape Speed Calibration

Procedures for adjusting head azimuth and tape speed using test equipment and tapes.

Bias Oscillator Calibration

Steps for adjusting bias oscillator frequency and level for optimal recording performance.

AM Tuner Alignment

Step-by-step procedure for AM tuner alignment using signal generator and measurement tools.

FM Tuner Alignment

Procedure for FM alignment, covering band frequency coverage and tracking adjustments.

PC Board Component Layout

PC Board MP3 Section Layout

Schematic Diagram

Exploded View

Parts List

Specifications