Need help?Do you have a question about the Kenwood SW-26HT and is the answer not in the manual?
Amplifier Specifications| rated output power | 50 W RMS (100 Hz, 0.1%, 4Ω) |
|---|---|
| input sensitivity & input impedance | 100 mV / 43 kΩ |
| rated power consumption | 50 W |
Speaker Specifications| enclosure | Bass-Reflex, Floor Standing Type |
|---|---|
| speaker units | 160 mm (6-1/2 ") Cone type |
| nominal impedance | 4 Ω |
Weight and Dimensions| width | 290 mm (11-7/16 ") |
|---|---|
| height | 300 mm (11-13/16 ") |
| depth | 420 mm (16-9/16 ") |
| net weight | 10 kg (22.0 lb) |
Read this page carefully to ensure safe operation. Units are designed for operation as follows.
Record serial number and refer to model/serial numbers for information or service.
Unpack unit carefully, check for shipping damage, and retain original packaging and accessories.
Covers power, environment, heat, electric shock, enclosure, and magnetic fields.
Addresses cleaning, accessories, overloading, servicing, and damage requiring service.
Includes protection from lightning, power lines, abnormal smells, and wall mounting prohibition.
Discusses optimal speaker placement, potential howling, and TV interference.
Ensures proper ventilation with 10cm clearance and mandates vertical installation.
Details the essential step of turning off power switches before connecting components.
Adjust phase for bass, crossover for balance, and volume for output level.
Covers input/output terminals, power switch, standby mode, and auto shutoff feature.
Warns against excessive input levels to prevent sound quality issues or damage.
Provides technical data for amplifier, speaker units, impedance, and dimensions.
Lists supplied accessories and provides notes regarding design and performance.
To Next Page
