Type ..........................................Subwoofer system with built-in
amplifier
[Amplifier]
100 watts RMS, at 4 Ω, from 20 Hz to 200 Hz with no more
than 0.09 % total harmonic distortion.
Input Sensitivity & Input Impedance
.............................................. 200 mV (12 kΩ)
Supply Voltage .......................U.S.A. and Canada AC 120 V
Other countries AC 110 V - 120 V/ AC 220 V - 240 V
Rated Power Consumption ..160 W
[Speaker]
Enclosure .................................Bass-Reflex, Floor Standing
Type
Speaker Units .........................200 mm (8") Cone type
Nominal Impedance ..............4 Ω
Dimensions ..............................Width : 300 mm (11-13/16")
Height : 333 mm (13-1/8")
Depth : 483 mm (19")
Net Weight ..............................15 kg (33.1 lb)
Supplied Accessories ............ Pin-plug cord × 1
....................................................Pads (× 4)
NOTE: DO NOT REMOVE THE GRILLE.
Note:
KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
* Refer to parts list on page 7.
To Next Page
Need help?
General
