EasyManua.ls Logo

Kenwood TH-25AT User Manual

Kenwood TH-25AT
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image

Other manuals for Kenwood TH-25AT

Question and Answer IconNeed help?

Do you have a question about the Kenwood TH-25AT and is the answer not in the manual?

Kenwood TH-25AT Specifications

General IconGeneral
ModulationFM
Antenna Impedance50 Ohms
TypeHandheld
Receiver Sensitivity0.16 µV
Power SupplyBattery pack or external DC power
Frequency Range144-148 MHz (USA)

Summary

Specifications and Accessories

1-1 Specifications

Detailed technical specifications for the transceiver models regarding frequency, mode, and power.

1-2 Accessories

List of included accessories with the transceiver package, such as antennas and battery cases.

Battery Pack

2-1 NiCd Battery Pack (PB-6)

Information on the NiCd battery pack, including charging requirements and initial use.

2-2 Recharging

Procedure and guidelines for recharging the NiCd battery pack, including charge times.

2-3 Manganese or Alkaline Batteries

Instructions for using optional alkaline or manganese batteries with the battery case.

2-4 Installing the Battery Pack

How to install and remove the battery pack from the transceiver securely.

2-5 Battery Voltage Level Meter

Explanation of the S meter's function as a relative battery voltage indicator during transmit.

2-6 Operating Time

Charts showing estimated operating time with different battery types and modes.

Operation

3-1 Operating Controls

Overview of the transceiver's main operating controls and their functions.

LCD Display and Indicators

Description of the LCD display and various indicators used on the transceiver.

Key Switches and Functions

Details on the function of specific switches like PTT, Monitor, and Lamp.

3-2 Receiver Operation

How to operate the transceiver's receiver functions, including tuning and frequency selection.

3-3 Transmitter Operation

Guidelines and precautions for operating the transmitter, including antenna SWR.

3-4 Memory Functions

Procedures for memory entry, recall, shift, lockout, and initialization.

3-5 Scan Operation

How to perform band and memory scans with the transceiver.

3-6 Repeater Operation

Information on using the transceiver with repeaters, including offsets and tone.

3-7 Beep Tone and Tone Alert

How to use beep tones and the tone alert system for monitoring signals.

3-8 Battery Saver and Auto Power Off

Features to conserve battery life and automatically shut down the transceiver.

3-9 Battery Saver and Auto Power Off Cancel

Procedures to enable or disable Battery Saver and Auto Power Off functions.

Maintenance

General Information

General advice on transceiver maintenance and factory alignment procedures.

Service Procedures

Guidelines for returning the transceiver for repair or service, including packing instructions.

In Case of Difficulty

Troubleshooting Guide

A table listing common problems, their probable causes, and recommended actions.

Optional Accessories

Accessory List

A list and descriptions of optional accessories available for the transceiver.

Radio Modification Procedures

Expanded RF Modification

Instructions for modifying the transceiver for expanded RF transmission range.

TH-25AT MARS/CAP Modification

Specific modification for MARS/CAP operation on the TH-25AT model.

KENWOOD TH-25/45 Out-of-Band Modifications

Modifications to enable transmission on frequencies outside standard ham bands.

TH-25/45AT Automatic Power Off Function

Modification to disable the automatic power off feature on the transceiver.

TH-25/45 W/TSU-6 Tone Alert Improvements

Modifications to improve the tone alert function's reliability with the TSU-6.

Related product manuals