Need help?Do you have a question about the Kenwood TH-45AT and is the answer not in the manual?
General| Modes | FM |
|---|---|
| Power Output | 5W |
| Memory Channels | 10 |
| Antenna Impedance | 50 ohms |
| Power Supply | 13.8V DC |
| Receiver Sensitivity | 0.16 μV (12 dB SINAD) |
| Current Drain | 1.5 A (max) |
Detailed technical specifications for TH-25A/25AT/25E, TH-45A/45AT/45E, TH-55AT/55E models.
Identification and function of transceiver controls.
How to operate the receiver, including frequency selection.
Steps and precautions for operating the transmitter.
Procedures for managing memory channels.
Procedures for repeater operation.
Setting transmitter offset frequencies and direction for repeaters.
Activating Tone and CTCSS functions for repeater access.
Troubleshooting table for common problems and solutions.
Modification to expand the RF transmit frequency range.
Modification for TH-25AT to transmit from 141.000 to 162.995 MHz.
Mods for TH-25/45 series to transmit outside amateur bands.
To Next Page
