1–1 6/99 Body Builders’ Manual
SECTION 1 INTRODUCTION
This manual was created to provide body builders with
appropriate information and guidelines useful in the
body planning and installation process. This information
will be helpful when installing bodies or other associ-
ated equipment.
This manual contains appropriate dimensional informa-
tion, guidelines for mounting bodies, guidelines for
modifying frames, electrical wiring information, and
other information useful in the body installation process.
The intended primary users of this manual are body
builders who install bodies and associated equipment
on Kenworth T300 Medium Duty vehicles. Dealers who
sell and service the vehicle will also find this information
useful.
This Body Builders’ Manual can be very useful when
specifying a vehicle, particularly when the body builder
is involved in the vehicle definition and ordering pro-
cess. Early in the process, professional body builders
can often contribute valuable information that reduces
the ultimate cost of the body installation.
This manual is not a maintenance manual or an
operation manual.
• For chassis maintenance and repair information
consult the
Kenworth Medium Duty Maintenance
Manual
available in the Service Department of the
selling dealer or you can order your own copy of the
maintenance manual from your local dealer.
• For chassis operating information consult the
Oper-
ator’s Manual
, included with each vehicle. They can
also be ordered from your local dealer.
SCOPE
To Next Page
Loading...
