NG310 - QUICK START GUIDE
This document is a quick guide for safely installing and implementing Kerio Control Box NG310 UTM
appliances.
1. General Safety Instructions
During installation follow these security instructions:
- The appliance should be placed on a flat surface or securely mounted horizontally in a rack
enclosure.
- Do not attempt to open or disassemble the appliance for any reason.
- Strictly follow the installation instructions (see section 3).
- Do not place the appliance near a heat source.
- Place the appliance in a ventilated space, making sure that the appliance fans and vents are
unobstructed at all times.
- Do not expose the appliance to liquids of any kind.In the event of liquid intrusion,unplug the
appliance immediately.
- Verify that the voltage and frequency of the power socket matches the values printed on the
power adapter before plugging in the appliance. Use only the power adapter supplied with the
appliance.
- Do not place any items on top of the power cable; keep the power cable away from walkways or
other areas where it could pose a tripping hazard.
-
2. Appliance Description
Kerio Control Box NG310 — Sub-1U table mountable appliance
To Next Page
Need help?
General
