Need help?Do you have a question about the Kerlink Wirnet iFemtoCell and is the answer not in the manual?
Core features and capabilities of the Wirnet™ iFemtoCell.
Details the physical aspects, casing, dimensions, and internal components.
Information on the power supply units and their technical specifications.
Technical data and performance metrics for the LoRa antenna.
Technical data and performance metrics for the Wi-Fi antenna.
Explains the function of status indicators (LEDs) on the Wirnet™ iFemtoCell.
Information on the device's push buttons, including reset and WPS functions.
Instructions and specifications for mounting the device on a wall.
Covers the detailed radio parameters, frequency bands, and modulations.
Information on provided accessories like RJ45 cables and debug tools.
Details compliance and regulatory approvals for the 868MHz version.
Details compliance and regulatory approvals for the 915MHz version.
Details compliance and regulatory approvals for the 923MHz version.
Outlines the possible WAN connection configurations for the device.
Guidelines and requirements for physically mounting the device enclosure.
Steps for connecting the device to power, network, and other peripherals.
Procedures for initial setup, including USIM, power on, and functional checks.
Routine checks for installation robustness and connection integrity.
Explains the function of status indicators (LEDs) on the Wirnet™ iFemtoCell.
Information on using the USB interface for firmware updates and debugging.
General| Category | Gateway |
|---|---|
| LoRa Channels | 8 |
| Ingress Protection | IP30 |
| Max RF Output Power | 27 dBm |
| Sensitivity | -137 dBm |
| Frequency Bands | AS923 |
| Connectivity | Ethernet, Cellular |
| Power Supply | PoE or 12V DC |
| Operating Temperature | -20°C to +55°C |
| LoRaWAN Protocol | 1.0.2 |
| Type | Indoor LoRaWAN Gateway |
To Next Page
