6
Individual modules and accessories
The following components have to be used for the correct
assembly of an x-net modular plastic manifold (flow and
return stem):
• x-net input module (2)
• x-net accessory module (2)
• x-net flow module (quantity according to number of
heating/cooling circuits)
• x-net return module (quantity according to number of
heating/cooling circuits)
• x-net end module (2)
• x-net euro taper adapter M3/4, with retaining
clip, 1 bag = 2 units (quantity of bags according to
number of heating/cooling circuits)
• x-net wall mount set (1 set = 2 wall mounts)
Installation information:
The following is additionally required for more than 8 he-
ating/cooling circuits:
• x-net wall mount module (2)
• x-net wall mount (1)
Vorlauf
0
0,5
1,0
1,5
2,0
3,0
4,0
5,0
l/mln
0
0,5
1,0
1,5
2,0
3,0
4,0
5,0
l/mln
Rücklauf
Installation diagram:
To Next Page
Loading...
