ADB_ADJ-BA-e-2032 17
9 Basic Operation
9.1 Start-up
As soon as the balance is supplied with energy, the
indicator [ ] is displayed.
To switch on press the ON/OFF key.
The balance carries out a display test.
As soon as the weight display appears, the balance is
ready for weighing.
9.2 Switch into stand-by mode
Press ON/OFF key, the display disappears
The power symbol [ ] will be displayed.
In stand-by mode the balance is ready for operation immediately after
switching-on without warm-up time.
To switch off the balance completely, disconnect the cable from the mains.
The balance starts in the mode, in which it has been switched off.
To Next Page
Loading...
