18 ADB_ADJ-BA-e-1830
9 Basic Operation
9.1 Start-up
As soon as the balance is supplied with energy, the
indicator [ ] is displayed.
To switch on press the ON/OFF key.
The balance carries out a display test.
As soon as the weight display appears, the balance is
ready for weighing.
9.2 Switch into stand-by mode
Press ON/OFF key, the display disappears
The power symbol [ ] will be displayed.
In stand-by mode the balance is ready for operation immediately after
switching-on without warm-up time.
To switch off the balance completely, disconnect the cable from the mains.
The balance starts in the mode, in which it has been switched off.
To Next Page
Loading...
Need help?
General
