8
3.2.4 Starting the machine
● When starting the machine all drives must be in the disengaged/off
position.
● Do not run engines indoors.
● Be aware of flammable fluids if jump starting cables are used. Avoid
explosion!
3.2.5 Whilst operating the machine
● Never leave the operator console/position while driving.
● Never adjust the handlebar while engine is running
● Never leave the equipment unsupervised, when the engine is running.
● Never leave the machine whilst engine is running.
● Do not transport goods or passengers on the machine.
● Always switch off machine, let it come to rest and disable a machine
before attempting to clear any type of blockage or making any
adjustment.
● Only leave the operating position once the machines has come to a
complete rest and is safely parked.
● If a fault with the machine is detected, stop immediately and rectify
before further use.
● Consider carefully before attempting to operate any machine on any
inclined slope.
● Where possible always traverse a slope, not up and down.
● Wet and icy weather can increase the hazard of operating any machine
on a slope.
● Always equip the machines fully with any attachments the manufacturer
may have designed to allow the machine to be operated in sloping,
slippery, unusual or extreme conditions, e.g. dual wheels, cage wheels.
● The machines designed for operation on slopes will to come to a rest if
you release the handlebars. In an emergency situation do not attempt to
prevent slipping using your physical strength otherwise you may be
carried away.
3.2.6 Leaving the machine unattended
● Close the fuel valve when machine is not in use (if present)
● Always choc the wheels or apply parking brake (where fitted), when
leaving a machine.
● Always disable a machine when not in use but removing the ignition key
or removing the spark plug lead.
● Try to minimise the possibility of unauthorised use.
● Never leave a machine before it has been switched off and come to a
complete rest.
Health and Safety
To Next Page
Loading...