Keter FACTOR 6x3 Assembly Instructions

Master Lock Model 175D – Combination Reset Instructions
To Open the Lock the First Time:
SET the combination to 0-0-0-0. DEPRESS shackle and PULL open.
To Set Your Own Combination:
REMEMBER: Combination can only be set when lock is open.
1. INSERT ‘reset’ tool (enclosed in package) in hole on side of lock.
2. PUSH key in and TURN key 90˚ in either direction (key automatically stays in this position). Failure to
exert force while pushing key in will result in a failed attempt to set or reset combination.
3. SET dials to desired combination.
4. TURN and remove reset tool. Lock is now set to new combination.
To Lock: SCRAMBLE the dials and CLOSE the shackle.
To Reopen: DIAL your combination and DEPRESS shackle.

Keter FACTOR 6x3 Specifications

General

Material	Polypropylene resin
Lockable	Yes
Ventilation	Yes
Floor Panel Included	Yes
Weather Resistant	Yes
UV Protected	Yes
Color	Brown
Roof Weight Capacity	75 kg/sqm
External Dimensions	178 cm W x 113 cm D x 208 cm H