Need help?Do you have a question about the Ketra D3 Series and is the answer not in the manual?
General| Type | LED Downlight |
|---|---|
| Housing Material | Aluminum |
| IP Rating | IP20 |
| Dimming Range | 0.1% to 100% |
| CRI | 90+ |
| Beam Angle Options | 15°, 25°, 40° |
| Control | Wireless |
| Voltage | 120V/277V |
| Lifespan | 50, 000 hours |
| Finish | White, Black |
| Wireless Communication | Zigbee |
Critical safety information regarding shock hazard and proper installation.
Lists the parts included with the D3 and its supported model numbers.
Details on beam angles, lumen output, and color performance.
Information on operating conditions, certifications, and electrical requirements.
Physical measurements of the D3 fixture, including ceiling hole size.
Covers the initial mounting procedures for the D3 fixture.
Detailed instructions for installing the D3 using nailer bars.
Detailed instructions for installing the D3 using butterfly brackets.
Procedure for connecting electrical wiring to the D3 fixture.
Guidance on cutting and fitting drywall around the installed fixture.
Steps for applying the retainer for mud-in flange installations.
Applying joint compound to the mud-in flange for a seamless finish.
Instructions for attaching the decorative trim to the downlight.
Procedure for adjusting the direction and tilt of the light optic.
Steps to set the optic to deep or low regress positions.
Instructions for removing and installing a new light optic.
Steps for safely removing and installing a new power supply unit.
Interpreting light colors to diagnose installation or connectivity issues.
Information on warranty terms and contact details for technical assistance.
To Next Page