Registration
Registrations can now be loaded from USB sticks.
Registrations name are up to 30 characters.
Complete save feature on Registration for Voice families.
Store of Intro of style: if in start, the style starts with the Intro saved, if in stop and
key start the style starts with the intro saved at the touch of a button or by Start
button.
In Registration mode Right 1 and 2 and 2nd Voice sliders are now saved on Player.
When the Registration changes, if the new one does not contain pdf, the previous
pdf setting is deleted.
Correct on the Registrations the transition from ACCORD.CLASSIC mode to MASTER.
Added PLAYBOX environment.
MIDI MERGE: (Found under Menu → Midi → Midi Port)
Added the possibility to now assign the physical MIDI in port to both GM and
KEYBOARD modes (internal midi merger)
USB midi device now assignable to the 3 front USB ports
In the MENU→CONTROLS screen, the USB MIDI IN KEYBOARD or GM mode can now
also be assigned to the 3 front USB ports. This function allows you to now connect a
Midi USB keyboard to either of the front USB ports and assign it to either function as
KEYBOARD or GM mode. This setting can be stored as a CUSTOM STARTUP.
You can now have simultaneously connected to the SD9 both MIDI In GM and a Midi
USB device if in MENU – CONTROLS, USB is set to MIDI IN KEYBOARD or a MIDI host
device MIDI is set to MIDI USB KEYB. In the MENU – MIDI setup page.
Modeling Edit
Added the SINGLE / GLOBAL function which avoids going back on VIEW to be able to
modify it.
Edit Voice
Added DOUBLE Up / Down function that can be saved within the voice: since this
feature can now be saved in a customized Voice, the “on-the-fly” selection of this
function does not apply any effect if nothing is stored in the Voice.
Added function FACTORY OVERWRITE and FACTORY RESTORE.
Fixed error in the RANGE edit (page 2/6) where the RANGE was highlighted in the
VELOCITY box.
Modulation was not reset by switching from a VOICE with an activated Lfo to
another with a deactivated Lfo.
To Next Page
Loading...
