• New functions IntroOnArr and EndingOnArr have now been introduced – this
allows you to now automatically determine which intro or ending is hearing
based on the current Arranger being used (thus saving you pedals). If …
o ArrA is on => Intro/Ending 1 will be heard when pedal is pressed.
o ArrB => Intro/Ending 2 will be heard when pedal is pressed.
o Arr C & D => Intro/Ending 3 will be heard when pedal is pressed.
• New functions ARRANGER DOWN and ARRANGER UP have been inserted. This
allows you to skip forward or backwards between the different style
arrangements.
User Buttons and Footswitch
New function FswChDelay has now been introduced (and can be stored in CUSTOM
STARTUP). Once turned on, this function ‘delays’ the chord recognition of minor, 7th,
m7th, 5+, dim, 6th and 7th when assigned to and used with the pedal in style mode.
This gives you time to press the footswitch assigned to any of these chords a few bars
before the actual chord change is needed – very useful for Guitar players.
Panel reboot application
Simultaneously pressing both the TALK & Enter buttons will restart the SD7 without
having to manually switch off the instrument.
This may be useful if any anomalies should occur.
Whole disk check
Pressing both the TALK + FADE & Enter enables the SD7 to do a complete disk check.
This function takes quite some time and so the instrument should not be switched off
during this procedure.
Once completed, the instrument will restart automatically.
Update modeling tab
Holding down the TALK + FADE & Enter buttons together the User modeling tables
will be automatically be updated.
Legato
Enhanced the Legato function shown on page 4 of the Voice Edit menu.
The Legato feature works on all the active voices except the Second voice.
There are 6 types of Legato: 3 Mono Legato and 3 Poly Legato.
Each time you touch the new Legato icon, a different Legato type is selected.
Choices are: Fast with fast attack, Medium with medium attack and Slow with a slow
attack.
To Next Page
Loading...
