Kettler K-7122-490 User Manual

Kettler Stockholm Table Tennis Table Instructions
Models K-7122-490, K-7122-890, K-7162-490, K7162-890
Copyright ©2004 Robbins Specialties
Kettler Stockholm Table Tennis Table Unpacking & Moving Instructions
Models K-7122-500, K-7122-700, K-7162-500, K7162-700
Copyright ©2004 Robbins Specialties
Two people are needed to carry the box,
because of the weight and bulk.
When ready to unpack and to remove the
contents from the carton, turn the carton 90
degrees from its upright position. Open the left
and right ends of the carton. With one person
pushing on the contents from one side, have
another person pull from the opposite side until
contents are removed from the carton.
When carrying the table up or down stairs, it is
advisable to remove the plastic wrap from the
table tops and carry each piece individually to
reduce the weight.
The following pages will provide a breakdown of
the parts contained within the carton.
- 1 -

Kettler K-7122-490 Specifications

General

Brand	Kettler
Model	K-7122-490
Category	Robotics
Language	English

Summary

Kettler Stockholm Table Tennis Table Parts Inventory

Master Carton Contents

Details the primary components found within the master carton.

Wheel Pack Contents

Corrugated Hardware Envelope Contents

Hardware Pack No. 1 Contents

Hardware Pack No. 2 Contents

Hardware Pack No. 2A Contents

Hardware Pack No. 2B Contents

Hardware Pack No. 3 Contents

Kettler Stockholm Table Tennis Table Assembly Instructions

Part 1: Center Support Assembly

Instructions for assembling the central support structure of the table.

Step #1 - Wheel Lock Assembly

Guides the assembly of the wheel lock mechanism.

Step #2 - Center Support Assembly

Step #3 - Center Support Assembly – Pivot Wheel

Step #4 - Center Support Assembly – Locking Wheel

Step #5 – Center Support Assembly – Net Post (A)

Step #6 – Center Support Assembly – Net Post (B)

Step #7 - Center Support Assembly – For Outdoor Tables ONLY

Step #8 - Center Support & Pivot Assembly

Part 2: Chassis Assembly

Step #9 - Center Support Chassis Assembly

Instructions for assembling the chassis of the table.

Step #10 -Chassis Support Assembly

Step #11 -Chassis & Table Top Assembly

Step #12 –End Leg Cross Brace Assembly

Step #13 -End Leg Cross Brace Assembly

Step #14 – Chassis Lock Connection Assembly

Instructions for Unfolding the Table

Step #15 – Attaching the Center Support Cover

Guides the attachment of the center support cover.

Instructions for Folding the Table

Step #16 – Net Installation

Instructions for installing the net system onto the table.