Need help?Do you have a question about the Kettler Royal and is the answer not in the manual?
General| Brand | Kettler |
|---|---|
| Model | Royal |
| Category | Exercise Bike |
| Language | English |
Follow drawings carefully, using lettered sequences for assembly steps.
Assembly must be done carefully by an adult, seeking help if needed.
Be cautious when using tools to avoid potential injuries during assembly.
Ensure a hazard-free area, properly dispose of packaging, and keep plastic bags from children.
Provide full article, spare part numbers, quantity, and serial number when ordering.
Read instructions carefully for safe use, maintenance, and personal safety.
Exercise cycle is for physical exercise by adult persons only; other uses are prohibited.
Unauthorized modifications or incorrect repairs can endanger user safety.
Replace worn or damaged parts immediately; use only original KETTLER spare parts.
Check all components every 1-2 months, especially bolts and nuts for tightness.
Instruct users, especially children, on potential dangers and supervise use.
Consult a doctor before starting exercise and base program on their advice.
Ensure sufficient safety distance from obstacles and main passageways.
Adjust handlebar and saddle position for a comfortable training position.
Check assembly, familiarize with functions, avoid damp rooms and liquids for corrosion prevention.
Carefully check that the equipment has been correctly assembled before use.
Avoid damp rooms to prevent rust; ensure no contact with liquids to prevent corrosion.
Machine is for adults; children should be supervised and instructed on proper use.
Do not use corrosive or abrasive materials for cleaning; prevent environmental pollution.
Prevent liquids or perspiration from entering the machine or electronics to avoid damage.
Always wear suitable shoes when using the exercise equipment.
Product is not suitable for persons weighing over 150 kg.
Verify all required parts are present and undamaged; contact dealer for complaints.
Study drawings carefully and follow the indicated sequence for assembly operations.
Bolt loosely, check assembly, then tighten nuts firmly using spanner; replace locknuts if reused.
State full article number, spare part number, quantity, and product S/N when ordering.
Locate the type label for serial number, article number, and maximum load.
Instructions for removing pedal arms, including specific steps and diagrams.
Weak or off computer display indicates need for battery change.
Remove compartment lid, replace with two new AA 1.5V batteries, noting polarity.
Do not dispose of used batteries in household waste; return to retailers or collection points.
To Next Page
