EN
56
10.1 - Maintenance History Log
All maintenance, repair, checking and adjustment tasks performed
on the automation system must be listed in the Maintenance Log.
It must be lled out at every service and kept by the Owner - to be
available in case of inspections by the organisms in charge.
The Maintenance Log refers to the following automation system:
Model Serial Number
Installed on At
According to the "Maintenance Schedule" (paragraph 9.1), a periodic
general check is recommended every 6 months or every 50,000 ope-
ning/closing cycles, and so is the replacement of some components
according to the "Routine replacements" schedule (paragraph 9.2)
MAINTENANCE SERVICE LOG
DATE
SERVICE PERFORMED
(repair, check, adjustment, ...)
TECHNICIAN'S
SIGNATURE
OWNER'S
SIGNATURE
To Next Page
Loading...