Keychron K1 Pro - Watch The Building Tutorial On Our Website; Factory Reset

9 WatchTheBuildingTutorialOnOurWebsite
If you are building the keyboard for the first time, we highly
recommend you watch the building tutorial video on our
website first, then start building the keyboard yourself.
10
Factory Reset
—gagagtetgtggjgøø—
8
Troubleshooting? Don't know what's going on with the keyboard?
(j) Plug in the powercableand switch the keyboardto Cablemode.
@ Factory reset the keyboardby pressingfn + J + Z (for 4 seconds).
@ Download the right firmware andQMK Toolbox from our website.
@Switch the keyboardto OFFmodeand remove the spacebar keycap
to find the reset button on the PCB.
@ Hold the reset key first, then switch the keyboardto Cablemode.
Release the reset key, and the keyboard will now enter DFIJ mode.
@ Flashthe firmware with the QMK Toolbox.
@ Factory reset the keyboardagainby pressingfn + J + Z (for 4 seconds).
* Step by step guide can be found on our website.