BLUETOOTH/WIRED MODE (TOGGLE SWITCH)
WIRED MODE
I.Switch the togg e switch to Cable option (it only works when a USB cable is plugged in).
2.Connect our cable with your PC and keyboard.
3.BackIit will be turned on.
*Under Wired Mode, keyboard will not enter into Battery Saver Mode.
BLUETOOTH MODE
1. Switch the keyboard to Bluetooth option.
2. Backlit will be turned on.
3. Hold "Fn1+Q" key for 4 seconds to activate Bluetooth pairing (the Bluetooth indicator fast
flashes for 3 minutes to detect pairing.
4. Search for the Bluetooth device "Keychron K6 Pro" on your device and connect it (the Bluetooth
indicator goes off after successful pairing).
Note: This keyboard supports pairing up to 3 devices simultaneously via combination key
"fnl" + "Q" / "fnl " + "W" / "fnl" + "E".Simply short presscombination keys "fnl" + "W" /
"fnl" + "E" to switch. Follow the above procedures to connect with other devices.
*The Bluetooth indicator will continue to flash for 3 minutes.
**Slow or failed connections may exist due to different Bluetooth versions, please make sure all the
settings are correct.
SWITCH BLUETOOTH DEVICES
Short press combination key"fnl" + "Q" / "fnl" + "W" / "fnl" + "E" to switch to other device.
18
To Next Page
Loading...
