9
Watch The Building Tutorial On Our Website
f you are building the keyboard for the first time, we highly
recommend you watch the building tutorial video on our
website first, then start building the keyboard yourself.
Factory Reset
8
Troubleshooting? Don't know what's going on with the keyboard?
@Try factory reset by pressingfn2 J + Z (for 4 seconds).
@ Download the right firmware for your keyboardfrom our website.
Remove the power cable from the keyboard.
@ Removethe spacebar keycapto find the reset button on the PCB
and switch the keyboard to cable mode.
@ Hold the reset keywhile plugging in the power cableand then
release the reset key. The keyboard now will enter DFU mode.
@ Flashthe firmware with the QMK Toolbox.
@ Factory reset the keyboard againby pressingfn2 + J +Z (for 4 seconds).
* Step by step guide can be found on our website.
To Next Page
Loading...
