25
What To Do If The Keyboard Doesn't Work In Bluetooth Mode
If your Keychron K8 Max is not functioning correctly in Bluetooth mode, try these troubleshooting
steps:
For the Computer or Smartphone:
• Open your device's Bluetooth settings and locate the list of paired devices.
• Find the entry for the Keychron K8 Max keyboard.
• Remove or delete the keyboard from the list (this process is often referred to as "unpairing").
• Restart your device to reset the Bluetooth system.
• After restarting, attempt to pair the keyboard again.
For the Keyboard:
• Turn the keyboard off using the toggle switch, and then turn it back on.
• Re-enter Bluetooth pairing mode by pressing fn + 1 (or the respective pairing key) and hold it
for 4 seconds until the indicator light flashes rapidly.
• Attempt to reconnect the keyboard to your device.
My Keyboard Isn’t Working in 2.4GHz Mode
If you encounter issues with the keyboard in 2.4GHz mode, follow these steps for troubleshooting:
• Check the Toggle Switch:
o Ensure that the mode toggle is set to 2.4GHz. This is essential for the keyboard to
operate in this mode.
• Reconnect the Receiver:
o Remove the 2.4GHz receiver from your device and press the key combination "fn" +
"4" on the keyboard for 4 seconds. This will activate the forced pairing mode.
o Reinsert the receiver into the device, ensuring the keyboard is placed within 20 cm of
the receiver during this process to ensure a stable connection.
To Next Page
Loading...
