13
Note: This keyboard supports pairing up to 3 devices simultaneously via combination
key “fn” + “1” / “fn” + “2” / “fn” + “3”.
*The Bluetooth indicator will continue to flash for 3 minutes.
**Slow or failed connections may exist due to different Bluetooth versions, please make
sure all the settings are correct.
Switch Bluetooth Devices
Short press combination key “fn” + “1” / “fn” +”2” / “fn” + “3” to switch to the other device.
Reconnect
1. Switch the keyboard to the Bluetooth option to activate the keyboard (the
keyboard will connect to the last connected device by default).
2. The Bluetooth indicator flashes for 4 seconds and automatically pairs with the
last paired device.
3. If the Bluetooth indicator is off, press any button to enter the connection again.
*The keyboard must have been paired with the device to perform this function.
Turn off the Keyboard
Switch to “Off”
Battery Saver
Under Bluetooth mode, the keyboard backlight turns off when it is inactive for 10
minutes. Tap any button to wake the keyboard. If want to disable this auto battery save
mode, press fn+S+O for 4 seconds. Then if want to enter this power save mode again,
press fn+S+O for 4 seconds.
Backlit Setting
To Next Page
Loading...
