Keychron Q12 - Tutorial and Troubleshooting; Watch The Building Tutorial; Factory Reset Procedure

7 Watch TheBuildingTutorialOnOurWebsite
f you are building the keyboard for the first time, we highly
recommend you watch the building tutorial video on our
website first, then start building the keyboard yourself.
8
Factory Reset
Allmg
g:gjgtk
8
Troubleshooting? Don't know what's going on with the keyboard?
@ Plugin the power cableandfactory resetthe keyboardby pressing
fn + J + Z (for 4 seconds).
@ Download the right firmware and QMK Toolbox from our website.
@ Unplug the powercableand remove the spacebar keycapto find the
reset button on the PCB.
@ Hold the reset key first, then plug in the power cable.Releasethe reset
key, and the keyboard will now enter DFU mode.
@ Flashthe firmware with the QMK Toolbox.
@ Factory reset the keyboardagainby pressingfn + J+ Z (for 4 seconds).
* Step by step guide can be found on our website.