Keychron Q3 Max - Switch To The Right System; Connect 2.4 GHz Receiver

Switch TOThe Right System
Please make sure the system togg e on
the top left corner has been switched
to the same system asyour computer's
operating system.
2 Connect2.4GHzReceiver
Connect the 2.4 GHz receiver to
the device USB port.
Mac Win
Switch togge to 2.4 GHz mode
G cable / BT
Type-C
ExtensionAdapter
cable
For Receiver
24 GHz
—ngogggggggø
Inga:
Note: For the best wireless experience, we recommend using the
extension adapter for receiver and putt'ng the 2.4 GHz receiver
G 2.4 GHz
somewhere on your desk close to keyboard for a low rate
of latency and fewer signal interferences.
5