9
If you are building the keyboard for the first time, we highly
recommend you watch the building tutorial video on our
website first, then start building the keyboard yourself.
Watch The Building Tutorial On Our Website
9
Factory Reset
10
① Try factory reset by pressing fn +J +Z (for 4 seconds)
② Download the right firmware for your keyboard from our website.
Remove the power cable from the keyboard.
③ Remove the space bar keycap to find the reset button on the PCB.
④ Hold the reset key while plugging in the power cable and then
release the reset key. The keyboard now will enter DFU mode.
⑤ Flash the firmware with the QMK Toolbox.
⑥ Factory reset the keyboard again by pressing fn + J + Z (for 4 seconds)
Troubleshooting? Don’t know what’s going on with the keyboard?
Step by step guide can be found on our website
To Next Page
Loading...
