9
Watch The Building Tutorial On Our Website
If you are building the keyboard for the first time, we highly
recommend you watch the building tutorial video on our
website first, then start building the keyboard yourself.
10
Factory Reset
Troubleshooting? Don't know what's going on with the keyboard?
@Try factory reset by pressingfnl + J+ Z (for4 seconds).
@ Downloadthe right firmware for your keyboard from our website.
Remove the power cable from the keyboard.
@ Removethe spacebar keycapto find the reset button on the PCB.
@ Hold the reset key while plugging inthe power cableandthen
release the reset key. The keyboard now will enter DFIJ mode.
@ Flashthe firmwarewith the QMK Toolbox.
@ Factoryresetthe keyboardagain by pressingfnl + J + Z (for 4 seconds).
* Step by step guide can be found on our website.
9
To Next Page
Loading...
