17
(Appendix 1) Data format of saved files
１．Multiple File format
The measurement data file is a text file in CSV format and can be read by spreadsheet software such as Excel.
The structure in the file is as follows, one file is created every time the image data is scanned once.
Each part will be explained below.
（１）Header section
File ID: RI76G0301 ←file identifier
Title: CR-a=130mm ←Measurement name
Date/Time: 2011/12/13 18:48:14 ←Measurement date and time
Comment: Corner reflector a = 130 mm ←Comment
Frequency[GHz]: 76.5 ←Transmission frequency
Range ←Distance range
Min[m]: 5
Max[m]: 10
Number of Data Points
Theta:
61 ←number of data points in the horizontal
direction N
Phi:
11 ←number of data
points in the vertical direction
M
Start Point ←Measurement start angle
Theta[deg]: -15
Phi[deg]: -10
Stop Point ←measurement end angle
Theta[deg]: 15
Phi[deg]: 10
Increment ←measurement angle unit
Theta[deg]: 0.5
Phi[deg]: 2
Reference ←Reference with known RCS value
Power[dBm]: 8.266 -4.219 (total power, peak power)
RCS[dBsm]: -10
Distance[m]: 4 ←Actual measured distance of reference
Multiple File
Header section
Measurement data section
Rectangular range data
section
Two-dimensional display
section
To Next Page
Loading...