Need help?Do you have a question about the Keyence CV-X Series and is the answer not in the manual?
General| Power Supply | 24 VDC |
|---|---|
| Weight | Varies by model |
| Camera Compatibility | Keyence cameras |
| Resolution | Varies by camera model |
| Processing Speed | High-speed processing |
| Inspection Speed | Varies by application |
| Communication Interfaces | Ethernet |
| Display | LCD touchscreen |
| Memory | Internal storage |
| Connectivity | Ethernet |
| Lighting Control | Direct connection and control of Keyence lighting units |
| Operating Temperature | 0°C to 45°C |
Explains warning symbols for safety and damage prevention.
Lists trademarks and product names mentioned in the document.
Covers general safety guidelines, controller cautions, and environmental conditions for safe operation.
Details actions for abnormalities, proper usage, and maintenance guidelines.
Outlines compliance with international regulations including CE, FCC, and KC markings.
Introduces typical system configurations combining optional products with the controller.
Identifies and describes connectors and controls on controller units.
Provides instructions for safe and correct controller unit installation.
Guides installing camera and illumination expansion units to extend system capabilities.
Details camera installation, including lens mounting and screw usage.
Explains lens selection based on target size and working distance using FOV charts.
Describes connecting cameras and peripherals to the controller.
Provides instructions for connecting the 24 VDC power supply to the unit.
Guides selecting and installing LED lighting systems for stable inspection.
Explains adjusting controller settings for proper image capture and system operation.
Covers SD card and USB HDD operations, including insertion, removal, and connection.
Introduces communication ports and I/O specifications of the controller.
Details RS-232C port specifications and external communication procedures.
Describes Ethernet port specifications and communication protocols for system connectivity.
Outlines USB interface specifications and system requirements for PC connection.
Details pin layout and connector specifications for the parallel I/O interface.
Provides specifications and terminal layouts for signal connections via terminal blocks.
Lists compatible cameras and input units for CV-X controller models.
Details maximum cable lengths and characteristics for camera cables and repeaters.
Illustrates typical cable connection scenarios between controllers and cameras.
Provides FOV charts for lens selection based on camera models, resolution, and working distance.
Lists and describes various optional accessories for the CV-X system.
To Next Page
