Mount Locker
The Mount unit and Sticker Pads can
attach ClicBot on your desk, refer to below
for how to use Sticker Pads.
The Locker unit can strengthen
connections
Apply Locker unit between
2 modules/parts.
Rotate until 2 datum
lines are aligned
Rotate
Locker unit
1.Peel off white cover 2.Apply the black color
sticker to the bottom
of the Mount unit.
3.Peel off the blue cover then
stick the Mount on a surface.
1.Lift the end of the sticker pad 2.Use your strength horizontally
and pull out the sticker gel.
Apply Sticker pad
Remove Sticker pad
15
Scan to buy
more modules
Scan for more
guidance for each
modules.
To Next Page
Loading...
