Keyscan KS810 - Adding Scanned Document to Existing File; Changing Scan Parameters via UI; Built-in Imaging Functions

2.2 The new scanned-page image will be developing in the same window over the previous
scanned image.
2.3 When finished scanning of the second image press [DONE].
2.4 The document window shows the last scanned page but represents two pages document.
2.5 You can navigate between the document pages by pressing the keyboard (Page-Up) and
(Page-Down) keys.
Step 3:
Use KeyScan Imaging application to add a new scanned document to existing document.
3.1 Select existing document on the KeyScan Imaging desktop.
3.2 Place a page on the scanner feeding tray.
3.3 Select from KeyScan Imaging main menu- <File><Scan Multi-page>
3.4 The Scan dialog should popup
3.5 Press the [SCAN] button to start scanning.
3.6 The new scanned-page image will be developing in the same window over the previous
scanned image.
3.7 When finished scanning press [DONE].
3.8 The document window shows the original page but represents two pages document.
3.9 You can navigate between the document pages by pressing the keyboard (Page-Up) and
(Page-Down) keys.
Step 4:
Show how to change scan parameters- Color, resolution, darkness using KeyScan Imaging
scanner user interface.
Step 5:
Show some of the imaging functions built into KeyScan Imaging.