Getting Started 1
Keysight E364xA User’s and Service Guide 27
applications. The E364xA power supplies may be programmed locally from the
front panel or remotely over the GPIB and RS-232 interfaces.
The E364xA power supplies have two ranges, allowing more voltage at a lower
current or more current at a lower voltage. The output range is selected from the
front panel or over the remote interfaces.
Operational features
–Single output dual range
– Constant voltage (CV) or constant current (CC) operation
– Overvoltage protection (OVP)
– Five storage locations (1 to 5) for user-defined operating states
– Automatic turn-on self-test
– Remote sense at rear panel terminals
– User calibration from the front panel or over the remote interfaces
Front panel operations
– Easy-to-use control features
– Output range selection
– Enabling or disabling OVP
– Setting the OVP trip levels
– Clearing the OVP conditions
– Setting and displaying the voltage and current limit values
– Storing or recalling the operating state
– Resetting the power supply to the power-on state
– Returning the power supply to the local mode from the remote mode
– Retrieving or scrolling error messages on the display
– Viewing the calibration message or system firmware revision
– Calibrating the power supply, including changing the calibration secure code
– Configuring the remote interfaces
– Enabling or disabling the output
To Next Page
Loading...
Need help?
General
