Need help?Do you have a question about the Keysight Technologies E3646A and is the answer not in the manual?
General| Power Output | 80 W |
|---|---|
| Number of Outputs | 2 |
| Weight | Approx. 8 kg |
| Voltage Programming Accuracy | 0.05% + 10 mV |
| Operating Temperature Range | 0°C to 55°C |
| Output Voltage Range | 0 to 35 V, 0 to 60 V |
| Ripple and Noise | < 350 μVrms / 2 mVpp |
| Load Regulation | < 0.01% + 2 mV |
| Display | LED |
| Current Programming Accuracy | ±0.2% + 10 mA |
| Voltage Ripple and Noise (20 Hz to 20 MHz) | <350 μVrms / 2 mVpp |
| Current Ripple and Noise (20 Hz to 20 MHz) | < 2 mArms |
| Storage Temperature Range | -40°C to 70 °C |
| Output Voltage | 0 to 20 V |
| Output Current | 5 A, 2.5 A, 1.5 A, 0.8 A |
| Dimensions (W x H x D) | 212.6 mm x 88.1 mm x 348.3 mm |
Detailed steps for setting up and operating in constant voltage mode.
Summary of SCPI commands for programming the power supply.
Detailed electrical performance parameters of the power supply.
Tests to verify CV programming and readback accuracy.
Tests to verify CC programming and readback accuracy.
Step-by-step guide for front panel calibration.
To Next Page
