3 Remote Interface Reference
System-Related Commands
98 E364xA User’s and Service Guide
*RST
Reset the power supply to its power- on state. Table 3- 3
shows the state of the power supply after a RESET from the
Recall menu or *RST command from the remote interface.
Table 3 - 3 Power supply state
[1]
Command E3646A state E3647A state E3648A state E3649A state
CURR 3 A0.8 A5 A1.4 A
CURR:STEP 0.052 mA 0.014 mA 0.095 mA 0.027 mA
CURR:TRIG 3 A0.8 A5 A1.4 A
DISP ON
OUTP OFF
OUTP:REL OFF
TRIG:DEL 0
TRIG:SOUR BUS
VOLT 0 V
VOLT:STEP 0.35 mV 1.14 mV 0.38 mV 1.14 mV
VOLT:TRIG 0 V
VOLT:PROT 22.0 V 66.0 V 22.0 V 66.0 V
VOLT:PROT:STAT ON
VOLT:RANG P8V (Low) P35V (Low) P8V (Low) P35V (Low)
[1] The voltage and current step sizes listed are typical values.
To Next Page
Loading...
