Keysight Technologies E3646A - Device-Specific Commands; Table 3-8 Non-SCPI Commands

Remote Interface Reference 3
SCPI Conformance Information
E364xA User’s and Service Guide 127
Device-specific commands
The following commands are device- specific to your power
supply. They are not included in the 1997.0 version of the
SCPI standard. However, these commands are designed with
the SCPI standard in mind, and they follow all of the
command syntax rules defined by the standard.
Table 3 - 8 Non-SCPI commands
APPLy {<voltage>|DEF|MIN|MAX}[,{<current>|DEF|MIN|MAX}]
APPLy?
CALibration
:COUNt?
:CURRent[:DATA] <numeric value>
:CURRent:LEVel {MIN|MID|MAX}
:SECure:CODE <new code>
:SECure:STATe {OFF|ON},<code>
:SECure:STATe?
:STRing <quoted string>
:STRing?
:VOLTage[:DATA] <numeric value>
:VOLTage:LEVel {MIN|MID|MAX}
:VOLTage:PROTection
DISPlay
[:WINDow]:MODE {VV|II|VI}
[:WINDow]:MODE?
OUTPut
:RELay[:STATe] {OFF|ON}
:RELay[:STATe]?
:TRACk[:STATe] {ON|OFF}
:TRACk[:STATe]?
SYSTem
:LOCal
:REMote
:RWLock