Remote Interface Reference 3
System-Related Commands
E364xA User’s and Service Guide 95
System-Related Commands
DISPlay {OFF|ON}
Turn the front panel display off or on. When the display is
turned off, outputs are not sent to the display and all
annunciators are disabled except the ERROR annunciator.
The display state is automatically turned on when you
return to the local mode. Press the
(Local) key to
return to the local state from the remote interface.
DISPlay:MODE {VI|VV|II}
Set the front panel display mode of the power supply. the
V- V display mode shows the voltages of the two outputs. The
I- I display mode shows the currents of the two outputs. The
V- I display mode shows the voltage and current for each
output. At *RST, the power supply is set to the V- I display
mode.
DISPlay:MODE?
Query the state of the display mode. Returns a string VV, II,
or VI.
DISPlay?
Query the front panel display setting. Returns 0 (OFF) or 1
(ON).
DISPlay:TEXT <quoted string>
Display a message on the front panel. The power supply will
display up to 11 characters in a message; any additional
characters are truncated. Commas, periods, and semicolons
share a display space with the preceding character and are
not considered individual characters.
To Next Page
Loading...
Need help?
General
