1Getting Started
Preparing the Power Supply
14 E364xA User’s and Service Guide
4 Replace the fuse- holder assembly in the rear panel.
Rack-mounting the power supply
You can mount the power supply in a standard 19- inch rack
cabinet using one of three optional kits available.
Instructions and mounting hardware are included with each
rack- mounting kit. Any Keysight System II instrument of the
same size can be rack- mounted beside the Keysight E3646A,
E3647A, E3648A, or E3649A.
Verify that the correct line voltage is selected and the power-line fuse
is good.
Remove the front and rear rubber bumpers before rack-mounting
the instrument.
To Next Page
Loading...
