Getting Started 1
Preparing the Power Supply
E364xA User’s and Service Guide 15
1 To remove the front bumper, stretch a corner and then
slide it off.
2 To remove the rear bumper, pull the bumper off from the
top as there are potrusions on the sides and bottom of
the cover.
3 To rack- mount a single instrument, order the adapter kit
(5063- 9243).
4 To rack- mount two instruments of the same depth
side- by- side, order the lock- link kit (5061- 9694) and
rack- mount kit (5063- 9214).
To Next Page
Loading...
