Operation and Features 2
View Menu Operation
E364xA User’s and Service Guide 41
Viewing the errors
1 Press twice to view the errors.
1: ERR -103
The total number of the errors detected will be displayed
shortly before the above message is displayed. The above
number 1 stands for the first error in queue and the -103
is the error code.
2 Scroll through the error numbers and view the text of the
error message by using the knob and key.
Press to increase the scrolling speed of the text on
the display.
3 Clear the errors and exit the menu.
All the errors are cleared when you exit the menu by
pressing
or let the display time- out for about
30 seconds.
Refer to Chapter 4, “Error Messages” for more
information.
Viewing the firmware revision
1 Enter the View menu and select FW REVISION.
FW REVISION
2 View the firmware revision of your power supply.
REV X.X-Y.Y-Z.Z
The first number is the firmware revision number for the
main processor; the second is for the input/output
processor; and the third is for the front panel processor.
Refer to
“Firmware revision query” on page 54 for more
information.
To Next Page
Loading...
Need help?
General
