Service and Maintenance 8
Repacking for Shipment
E364xA User’s and Service Guide 181
Repacking for Shipment
If your unit is shipped to Keysight for service or repair, you
need to:
• attach a tag to the power supply identifying the owner
and indicating the required service or repair. Include the
instrument model number and full serial number.
• place the power supply in its original container with
appropriate packaging material.
• secure the container with a strong tape or metal bands.
If the original shipping container is not available, place your
unit in a container which will ensure at least 4 inches of
compressible packaging material around all sides of the unit.
Use static- free packaging materials to avoid additional
damage to your unit.
Keysight recommends that you always insure your shipments.
To Next Page
Loading...
Need help?
General
