Characteristic and Specifications 7
E364xA User’s and Service Guide 187
Output terminal
isolation
(maximum, from
chassis ground)
– ±60 Vdc when connecting shorting conductors without insulation between the (+)
output and the (+) sense terminals and between the (–) output and the (–) sense
terminals.
– ±240 Vdc when connecting insulated shorting conductors between the (+) output and
the (+) sense terminals and between the (–) output and the (–) sense terminals.
AC input ratings
(selectable via
two switches on
the PC board)
– 115 Vac ±10%, 47 Hz to 63 Hz (standard)
– 230 Vac ±10%, 47 Hz to 63 Hz (option 0E3)
– 100 Vac ±10%, 47 Hz to 63 Hz (option 0E9)
Maximum input
power
105 VA 105 VA 205 VA 175 VA 300 VA 270 VA
[a] Maximum change in the output or readback per °C after a 30-minute warm-up.
[b] Following a 30-minute warm-up, with the output in the ON state according to the operating mode (CC with load or CV), and with a change in
the output over 8 hours under constant load, line, and ambient temperature.
Table 7-3 Supplemental characteristics
To Next Page
Loading...
Need help?
General
