MAC Demo Software
Setup tab
Channel3,1,1.99
Channel4,1,2.28
Channel5,1,3.30
Channel6,1,4.48
Channel7,1,3.36
Channel8,1,2.24
B – Module is the specific module that contains the acquisition channel from which we
wish to extract magnitude and phase measurements from. It will be identified by the
PXI address or a simulated name as shown in the example above.
C – Channel is the channel from which the magnitude and phase values will be made.
D – Segment is the specific segment (in range of 0…n-1 where n is the number of
s
e
gments
spe
ci
fied
in
t
he
s
e
tup
ta
b
main
form
GUI).
You
ca
n
a
l
s
o
s
e
l
e
ct
<AL
L
>
from
the drop down box to signify that all segments should be exported (one after the other
sequentially) in the exported data.
32 Keysight Y1299A-003 MAC Reference Solution Startup Guide
To Next Page
Loading...
