Operating the chair
Activating a new remote control
Before using a new remote control or a different one:
Unplug the chair for 2 minutes.
Plug the chair and press ON/OFF on the main control panel of the chair.
Once the led of the key ON/OFF of the main control panel is on, press the key ON/OFF of the
remote control. On the screen you will see a drawing of a person as long as there is a connection
between the remote control and the chair.
If there are two or more chairs with remote control, you must never perform simultaneously the process
of ACTIVATING A NEW REMOTE CONTROL. You must nish the process with one chair and then start
with the next one.
On and off functions of the remote control
Press the key ON/OFF of the remote control to turn it on or off.
If the main control panel is not turned off, the remote control will switch off 15 minutes after the last
time you pressed a key.
If the remote control does not work
Check the state of the batteries. ATTENTION: USE ONLY ALKALINE BATTERIES (SIZE “AAA”/LR03).
The remote control has been designed to work within the armrest area. You should not use it out of
this area.
ON/OFF (1)
This switch turns the chair on and off. If the chair is on, when you press this switch, the
automatic switch-off function will raise the backrest and lower the footrest, stop all the
massage systems and nally turn the chair off. This process can be interrupted at any time
by pressing the STOP (3) button on the control panel.
Stop the massage and the recliners (2)
Press this key to stop all massage functions and to bring the mechanism to the resting
position.
Low batteries
If this led blinks, change the batteries in the rear part of the remote control.
Back massage programmes
Anti Stress program with function “Smart Adapt” (3)
With this program, we get a massage which exerts increasing pressure and covers all points
of the back and legs, in order to slow the effects of daily stress. Combines the massages
of the back and legs.
To restore or to ensure that the massage program matches with the factory settings, hold
down the button for 2 seconds. The chair gives an acoustic signal when the settings have
been reset.
Sport program with function “Smart Adapt” (4)
It is the ideal program for those who are accustomed to receive massage sessions. It
uses a high intensity of massage pressure, perfect for those who usually do sport or who
have a strong muscle building. On preventive level, especially the use before sport is
recommended because it delays fatigue in the back muscles and after exercise because
it reduces the muscle tension at least 42%. In addition it also facilitates the relaxation and
muscle recovery. Combines the massages of the back and legs.
A
B
C
To Next Page
Loading...